Stealth R/T Turbo V6-2972cc 3.0L DOHC Turbo (1996)
1. Remove the MFI relay.
2. Check for continuity between MFI relay terminals.
Terminal No.
Continuity
2 - 4
Conductive (approx. 70 ohms)
3. Using jumper wires, connect terminal 4 of MFI relay to battery + terminal and terminal 2 of MFI relay to battery - terminal.
4. Check the continuity between relay terminals 1 - 3 while connecting and disconnecting the jumper lead at the battery - terminal.
Jumper lead
Continuity across terminals 1 and 3
Connected
Conductive (0 ohms)
Disconnected
Nonconductive
5. Replace the MFI relay if any defect is evident.