Stealth R/T Turbo V6-2972cc 3.0L DOHC Turbo (1996)
1. Install a new gasket. Poor idle will result if the gasket is not installed with the proper orientation.
2. Install the Throttle Body and torque the bolts, in a cross-pattern, to 10-13 Nm (7-9 ft-lbs).
3. Reconnect the throttle cable (and cruise control cable, if equipped).
4. Reconnect the intake air duct.
NOTE: For the initial adjustment of the Throttle Position Sensor and the idle speed screw, refer to Throttle Position Sensor/Adjustment Procedures
under Computers And Control Systems.
See: Sensors and Switches - Fuel Delivery and Air Induction/Throttle Position Sensor