Stealth R/T Turbo V6-2972cc 3.0L DOHC Turbo (1996)
Ignition Power Transistor Inspection
NOTE: An analog-type circuit tester should be used.
Ignition Power Transistor
Ignition Power Transistor Continuity Table
No. 1 - No. 4 Coil Side
1. Connect the negative (-) terminal of the 1.5 V power supply to terminal (4) of the ignition power transistor; then check whether there is continuity
between terminal (13) and terminal (4) when terminal (3) and the positive (+) terminal are connected and disconnected.
NOTE: Connect the (-) probe of the circuit tester to terminal (13).
