dodge Workshop Repair Guides

Dodge Workshop Service and Repair Manuals

Sensors and Switches - Ignition System > < Component Tests and General Diagnostics|Page 5114
Page 1
background image

Ignition Control Module: Oscilloscope Patterns and Waveforms

PRIMARY SIGNAL OF IGNITION COIL

1. Run the engine at an idle speed.

Primary Signal Of Ignition Coil

2. Connect the probe to oscilloscope pick-up point 1 as shown in the circuit diagram, and check the primary signal of the ignition coil.

CONTROL SIGNAL OF IGNITION POWER TRANSISTOR

Control Signal Of Power Transistor

Connect the probe to oscilloscope pick-up point 2 as shown in the circuit diagram, and check the control signal of the ignition power transistor.

Sensors and Switches - Ignition System > < Component Tests and General Diagnostics|Page 5114