Stealth R/T Turbo V6-2972cc 3.0L DOHC Turbo (1996)
Brake Fluid Pump Relay: Testing and Inspection
1. Remove right front splash shield, then the relay box cover by inserting a screwdriver between hydraulic unit and cover to pry off lock.
2. Remove relays, large one is motor relay and small one is valve relay.
Fig 78 ABS Power Relay Inspection
Fig 79 ABS Power Relay Continuity Chart
3. Check continuity of relays both when energized and de-energized as shown.
4. If continuity is not as specified, replace valve or motor relay.
