Stealth R/T Turbo V6-2972cc 3.0L DOHC Turbo (1996)
Fuel Pump Ballast Resistor Relay: Testing and Inspection
Fuel Pump Relay II
1. Remove Fuel Pump Relay II.
2. Use a jumper wire to connect terminal 3 of Fuel Pump Relay II and the positive terminal of the battery and use another jumper wire to connect
terminal 1 and the negative terminal of the battery.
3. With the jumper wire connected to and disconnected from the negative terminal of the battery, check the continuity between terminals 2 and 5 of
Fuel Pump Relay II and between terminals 4 and 5, of Fuel Pump Relay II.
Jumper wire
Continuity between
Continuity between
terminals 2 and 5
terminals 4 and 5
Connected
No continuity
Continuity present
Disconnected
Continuity present
No continuity
4
Replace Fuel Pump Relay II if it is faulty.
