Stealth R/T Turbo V6-2972cc 3.0L DOHC Turbo (1996)
flowing through the switch is much less than that for the light.
3. The relays may be classified into the normal open-type and the normal close-type by their contact construction.
NOTE: The deenergized state means that no current is flowing through the coil and the energized state means that current is flowing through the
coil.
When a normal close-type relay as illustrated here is checked, there should be continuity between terminals 1 and 2 and between terminals 3 and 4
when the relay is deenergized, and no continuity between terminals 3 and 4 when the battery voltage and ground are applied to the terminals 1 and
2. A relay can be checked in this manner. It cannot be determine if a relay is okay or faulty by checking its state at rest.
Switch Testing
In a circuit diagram, a switch is represented by a symbol and in the idle state.
Normal Open Or Normal Close Switch
1. Normal Open Or Normal Close Switch
Switches are classified into those which make the circuit open and those which make the circuit closed when OFF.
