Stealth R/T Turbo V6-2972cc 3.0L DOHC Turbo (1996)
Throttle Position Sensor: Adjustments
Throttle Position Sensor Location
1. Disconnect the throttle position sensor connector.
Idle Position Switch, Continuity Check
2. Using jumper wires, connect an ohmmeter across terminal 3 (closed throttle position switch) and terminal 4 (sensor ground) of the throttle position
sensor.
Idle Switch Continuity Check, Set-up
3. Insert a 0.65-mm (.025 in.) thick feeler gauge between the fixed Speed Adjusting Screw (SAS) and throttle lever.
Idle Switch Check For Continuity
4. Loosen the throttle position sensor mounting bolts and turn the throttle position sensor body fully counterclockwise.
5. In this condition, check that there is continuity across terminals 3 and 4
