Stealth R/T Turbo V6-2972cc 3.0L DOHC Turbo (1996)
OIL SEAL/INNER BEARING REMOVAL
With the special tool, remove the inner bearing and oil seal from the axle housing.
Inspection
Check the companion flange for wear or damage.
Check the dust shield for deformation or damage.
Check the wheel bearings for burning or discoloration.
Check the wheel bearing for unsmooth rotation.
Check the axle shaft for cracking, wear or damage.
Check oil seal for cracking or damage.
Installation
INNER BEARING INSTALLATION
With the special tool, press fit the inner bearing onto the axle housing.
OIL SEAL INSTALLATION
1. With the special tool, press the oil seal onto the axle housing with the depression in the oil seal facing upward, until it contacts the shoulder on the
inside of the axle housing.
NOTE: When tapping the oil seal in, use a plastic hammer to lightly tap the top and circumference of the special tool, press fitting gradually and
evenly.
2. Apply multipurpose grease to the oil seal lip.
Specified grease:
MOPAR Multi-Mileage Lubricant Part No. 2525035 or equivalent
