Stealth R/T Turbo V6-2972cc 3.0L DOHC Turbo (1996)
Fig.60 Differential Gear Backlash Check
4. Insert a 0.0035 inch (.09 mm) feeler gauge to replace 0.0012 inch (.03mm) feeler gauge.
5. Insert side gear holding tool No. MB990990, or equivalent, at spline part of differential case B (right) and ensure side gear does not rotate
6. Differential gear backlash (clearance in thrust direction of side gear) should be within 0.0012-0.0035 inch (.03 mm-0.09 mm). If clearance in the
thrust direction of the side gear is within standard value range, backlash of differential gear is normal.
7. If clearance in thrust direction of side gear is not within specification, remove differential case A and make adjustment by adjusting thickness of
the thrust washer (left).
