Stealth R/T Turbo V6-2972cc 3.0L DOHC Turbo (1996)
Fig.3 Pressing Front Drive Axle From Hub
9. Reverse procedure to install, noting the following:
a. Ensure driveshaft washer is correctly installed.
b. Lower vehicle to ground, then attach and adjust driveshaft nut, torquing to 144-188 ft. lbs.
c. If cotter pin holes do not line up, tighten bolt without exceeding torque of 188 ft. lbs., until holes line up.
d. Install cotter pin. Always use new cotter pins.
e. Refill transaxle to proper level.
