Stealth R/T Turbo V6-2972cc 3.0L DOHC Turbo (1996)
Constant Velocity Joint: Service and Repair
Tripod Joint Type Driveshaft
When servicing the drive axle, do not disassemble the Birfield bell type or Rzeppa type constant velocity joint, as components of this type joint are
precision fitted and are replaced only as a unit.
Disassemble
1. Remove boot clamps, then remove boot from tripod joint housing and position on drive axlem.
Fig.8 Exploded View Of Tripod Type Front Drive Axle, Less Inner Shaft
