Stratus L4-2.0L VIN C (1997)
Wheel Speed Sensor: Service Precautions
NOTE:
-
Proper installation of the Wheel Speed Sensor Cables is critical to continued system operation. Be sure that cables are installed, routed and clipped
properly. Failure to install speed sensor cables as in the on car service section of this manual, may result in contact with moving parts or over
extension of cables, resulting in an open circuit.
CAUTION:
-
If speed sensor head locating pin has seized to the steering knuckle, do not attempt to remove speed sensor head by grasping with pliers and
turning. This will damage the speed sensor head. Use only the following procedure.
-
When installing the wheel speed sensor cable routing bracket on the steering knuckle, the speed sensor cable must be looped toward the shock
absorber. If speed sensor cable is not routed in this direction it will rub against the tire or wheel, damaging the speed sensor cable.
