Stratus L4-2.0L VIN C (1997)
Center Console Front Attaching Screws (Automatic)
Center Console Attaching Screws (Manual)
3. Remove the 2 screws attaching the front of the center console to the gear selector or shifter.
4. Raise the park brake hand lever to approximately the half way point of its total travel. This will allow for the required clearance to remove the
center console.
5. Remove the center console/arm rest from the vehicle.
6. Lower park brake lever handle.
Park Brake Lever Output Cable Adjustment Nut
7. Loosen adjusting nut on park brake lever output cable. This will take tension off output cable, allowing it to be easily removed from tension
equalizer.
CAUTION: Discard output cable retaining clip after removing it from park brake cable tension equalizer. Retainer is not to be re-used, a new
retainer is to be installed when attaching output cable to tension equalizer.
