Stratus L4-2.0L VIN C (1997)
Oil Pressure Warning Lamp/Indicator: Description and Operation
CIRCUIT OPERATION
The low oil pressure lamp is used to alert the operator that engine oil pressure has dropped below a predetermined pressure. The oil pressure
switch uses a switch that CLOSES when the pressure is below the predetermined level. The switch is case grounded to the engine block.
Power for the lamp is supplied on the F15 circuit. This circuit also powers the Anti-Lock lamp, located internal to the cluster, high speed fan relay,
A/C Clutch relay, and the Powertrain Control Module (PCM). This circuit is protected by a 10 amp fuse located in cavity 9 of the Power
Distribution Center (PDC).
The ground side of the lamp is controlled by the G6 circuit. This circuit is connected from the instrument cluster to the engine oil pressure switch.
