Stratus L4-2.0L VIN C (1997)
Dimmer Switch: Description and Operation
CIRCUIT OPERATION
The dimmer control is used to control the intensity of the instrument panel lamps. It is located in the left multi-function switch. Power for the
control is supplied from the L7 circuit, which is the feed for the parking lamps. This circuit is HOT when the parking lamp switch is in the ON
position. Ground for the control is provided on the Z1 circuit which terminates at the instrument panel left side cowl.
The control uses a variable resistor and is connected to circuit E19. Circuit E19 connects to the Body Control Module (BCM). When the operator
moves the control, resistance in the circuit changes and the signal sent to the BCM changes. With the change is resistance the BCM sends a signal
over the CCD Bus to the instrument panel changing the lamp intensity.
