Stratus L4-2.0L VIN C (1997)
5. Install the engine support bracket on the front of the front suspension crossmember. Install the 2 support bracket to suspension crossmember
attaching bolts and tighten to a torque of 75 Nm (55 ft. lbs.).
6. Install bolt attaching engine support bracket to transaxle mounting bracket. Tighten bolt to a torque of 75 Nm (55 ft. lbs.).
7. Install the 2 bolts attaching the rear support bracket, for the under engine support bracket, to the rear of the front suspension crossmember. Tighten
bolts to a torque of 75 Nm (55 ft. lbs.).
8. Install vehicle wiring harness connector onto power steering fluid pressure switch on steering gear assembly. Be sure locking tab on wiring harness
connector is securely latched to pressure switch.
9. Install the antilock brakes hydraulic control unit mounting bracket on the front suspension cross member. Install the 3 mounting bracket to
crossmember attaching bolts and tighten to a torque of 28 Nm (250 inch lbs.).