Stratus L4-2.4L DOHC (1995)
Secondary Sill Weatherstrip
3. Separate secondary sill weatherstrip from vehicle.
4. Reverse the preceding operation for installation.
OUTER BELT MOLDING REMOVAL
Outer Belt Moulding
1. Remove screw holding rearward end of molding to front door.
Outer Belt Moulding Removal
2. Using a rubber mallet and block of wood, tap upward at each clip holding belt molding to door.
3. Separate belt molding from door.
4. Reverse the preceding operation for installation.
DOOR GLASS RUN WEATHERSTRIP REMOVAL
1. Remove door trim panel.
2. Remove door glass.
