Stratus L4-2.4L DOHC (1995)
3. Remove bolt holding bottom of front lower run channel to inner door panel.
4. Pull glass run weatherstrip from door glass opening frame.
Door Glass Run Weatherstrip
5. Remove lower run channel through opening at top of door.
6. Reverse the preceding operation for installation.
A-PILLAR SEAL REMOVAL
1. Open front door.
2. Using a fork-type tool (C-4828), disengage push-in fasteners holding A-pillar seal to A-pillar.
3. Separate A-pillar seal from vehicle.
4. Reverse the preceding operation for installation.
Drip Rail Weatherstrip
DRIP RAIL WEATHERSTRIP REMOVAL
1. Open front and rear doors.
2. Starting at the bottom of the A-pillar, pull the drip rail weatherstrip from the windshield side molding.
3. Pull the drip rail weatherstrip from the roof rail pinch flange above door openings.
4. Separate drip rail weatherstrip from vehicle.
5. Reverse the preceding operation for installation.
