Stratus L4-2.4L DOHC (1995)
Rear Door Weatherstrip: Service and Repair
Door Opening Weatherstrips
DOOR OPENING WEATHERSTRIPS REMOVAL
1. Open door.
2. Remove door sill scuff plate.
3. Pull weatherstrip from pinch flange around door opening.
INSTALLATION
Position the splice in the door opening weatherstrip in the center of the bottom of the opening and reverse the preceding operation.
Drip Rail Weatherstrip
DRIP RAIL WEATHERSTRIP REMOVAL
1. Open front and rear doors.
2. Starting at the bottom of the A-pillar, pull the drip rail weatherstrip from the windshield side molding.
3. Pull the drip rail weatherstrip from the roof rail pinch flange above door openings.
4. Separate drip rail weatherstrip from vehicle.
5. Reverse the preceding operation for installation.
Rear Door Inner Belt Weatherstrip
REAR DOOR INNER BELT WEATHERSTRIP REMOVAL
1. Remove rear door trim panel.