dodge Workshop Repair Guides

Dodge Workshop Service and Repair Manuals

Circuit Description|Page 5480 > < Circuit Description
Page 1
background image

Ignition Coil: Description and Operation
Coil Pack

Fig. 12 Ignition Coil Pack

WARNING:  The direct ignition system generates approximately 40,000 volts. Personal injury could result from contact with this system.

The coil pack consists of 2 coils molded together. The coil pack is mounted on a bracket, over the valve cover. High tension leads route to each
cylinder from the coil. The coil fires two spark plugs every power stroke. One plug is the cylinder under compression, the other cylinder fires on
the exhaust stroke. Coil number one fires cylinders 1 and 4. Coil number two fires cylinders 2 and 3. The PCM determines which of the coils to
charge and fire at the correct time.

The Auto Shutdown (ASD) relay provides battery voltage to the ignition coil. The PCM provides a ground contact (circuit) for energizing the coil.
When the PCM breaks the contact, the energy in the coil primary transfers to the secondary causing the spark. The PCM will de-energize the ASD
relay if it does not receive the crankshaft position sensor and camshaft position sensor inputs. 

Circuit Description|Page 5480 > < Circuit Description