dodge Workshop Repair Guides

Dodge Workshop Service and Repair Manuals

Manual Transaxle|Page 7914 > < Manual Transaxle
Page 1
background image

Starter Motor: Testing and Inspection
Automatic Transaxle

-

Check for a blown engine starter motor fuse in cavity 8 of the PDC

-

With the gear selector in the PARK or NEUTRAL position, move the ignition key to the START position and listen for the starter motor relay to
click. The engine starter motor relay is located in the PDC

-

Check for a good ground at the starter motor

-

The PARK/NEUTRAL position switch is case grounded and supplies the ground for the coil side of the starter relay

Manual Transaxle|Page 7914 > < Manual Transaxle