Stratus L4-2.4L DOHC (1995)
14.
Remove A/C condenser tube attaching bracket on right side edge of radiator (Figure 2).
15.
Insert mounting straps from the radiator side of the condenser through the fins in the previously marked locations. Install spacers, auxiliary cooler
and locks.
16.
Install left side cooler hose support bracket, start screw, do not tighten (Figure 2).
17.
Install right side condenser tube support bracket, start screw, do not tighten.
18.
Slide air seals between radiator and condenser, position over condenser mounting brackets (Figure 3).
19.
Install and tighten (4) A/C condenser to radiator attaching screws.
20.
Tighten A/C condenser tube attaching bracket on right side of radiator and cooler tube attaching bracket on left side of radiator.
21.
Remove lower transmission fluid cooler line from radiator.
22.
Install preformed cooler line from auxiliary cooler to lower radiator cooler nipple.
23.
Install cooler line, p/n 04596420AB, from transmission outlet to upper cooler line from auxiliary cooler.
24.
Install cooler line, p/n 04596630AA, from transmission inlet to upper radiator cooler nipple.
25.
Install bumper reinforcement beam, fascia, head lamps, and upper radiator cross member. Use new fascia to lower cross member attaching
screws/retainer, p/n 06502625.
26.
Start engine, check transmission level, check for leaks, add Mopar ATF+2 Type 7176, p/n 04798233, as necessary.
