Stratus L4-2.4L VIN X (1998)
Unlocked CAB Connector
4. Install the 25 way connector into the socket on the CAB. The connector is installed using the following procedure. Position the 25 way connector
in the socket on the CAB and carefully push it down as far as it will go. When connector is fully seated into the
CAB socket push in the connector lock as far as it will go. This will pull the 25 connector into the socket on the CAB and lock it in the installed
position.
HCU Mounting Bracket Rear Bolts
5. Install the 2 bolts attaching the back legs of the HCU mounting bracket to the front suspension crossmember.
HCU Mounting Bracket Front Bolt
