Stratus L4-2.4L VIN X (1998)
6. Install the bolt attaching the front leg of the HCU mounting bracket to the front suspension crossmember.
7. Tighten the 3 bolts mounting the HCU mounting to the front suspension crossmember to a torque of 28 Nm (250 inch lbs.).
Master Cylinder Brake Tube Connections To HCU
8. Install the primary and secondary brake tubes coming from the master cylinder in the HCU inlet ports.
Chassis Brake Tube Connections To HCU
9. Install the 4 chassis brake tubes in the outlet ports on the HCU.
Torquing Primary And Secondary Brake Tube Nut
