Stratus L4-2.4L VIN X (1998)
Correct Front Wheel Speed Sensor Cable Routing
CAUTION: When installing the wheel speed sensor cable routing bracket on the steering knuckle, the speed sensor cable must be looped toward
the shock absorber as shown. If speed sensor cable is not routed in this direction it will rub against the tire or wheel, damaging the speed sensor
cable.
3. Install the speed sensor cable routing bracket on the steering knuckle. Install and tighten routing bracket mounting bolt to a torque of 12 Nm (105
inch lbs.).
Installing Speed Sensor Head In Steering Knuckle
4. Install speed sensor head on steering knuckle. When installing speed sensor head on steering knuckle, apply a small amount of grease on speed
sensor locating pin. Use Mopar, Multi-Purpose Grease or an equivalent on speed sensor head locating pin. Install the speed sensor head attaching
screw and tighten to a torque of 6 Nm (55 inch lbs.).
5. Install the wheel and tire assembly on vehicle.
6. Road test vehicle to ensure proper operation of the base and ABS systems.
