Stratus L4-2.4L VIN X (1998)
Brake Master Cylinder: Service and Repair
Master Cylinder Replacement
Without ABS
REMOVE
Master Cylinder Fluid Level Sensor
1. Remove vehicle wiring harness connector from brake fluid level sensor, in master cylinder brake fluid reservoir.
Primary And Secondary Ports Without ABS
2. Disconnect the primary and secondary brake tubes from master cylinder outlet ports. Install plugs at all open brake tube outlets on master cylinder
assembly.
3. Using Mopar, Brake Parts Cleaner or an equivalent, clean area where master cylinder attaches to booster.
Master Cylinder Mounting To Vacuum Booster
