Stratus L4-2.4L VIN X (1998)
Brake Proportioning/Combination Valve: Service and Repair
With Antilock Brakes
CAUTION: Proportioning valves should never be disassembled.
REMOVE
Proportioning Valve Location
1. Remove chassis brake from proportioning valve controlling the rear wheel of the vehicle which has premature wheel skid.
CAUTION: When removing proportioning valve from flex hose place wrench on proportioning valve not adapter fitting. The adapter fitting is
not to be removed from the proportioning valve.
Proportioning Valve Removal
2. Remove proportioning valve from brake flex hose.
INSTALL
1. Install proportioning valve on brake flex hose. Tighten proportioning valve to a torque of 17 Nm (145 inch lbs.).
2. Install brake tube on proportioning valve. Tighten tube nuts to 17 Nm (145 inch lbs.) torque.
3. Bleed the affected brake line.
