Stratus L4-2.4L VIN X (1998)
12. Remove the 2 bolts attaching the back legs of the HCU mounting bracket to the front suspension crossmember.
HCU To Bracket Mounting Bolt
13. Remove bolt attaching the side of the HCU to the mounting bracket.
HCU To Bracket Mounting Bolt
14. Remove the 2 bolts attaching the top of the HCU to the mounting bracket.
CAUTION: Do not apply a 12 volt power source to any terminals of the 25 HCU connector when disconnected from the Controller Antilock
Brakes (CAB).
