Stratus L4-2.4L VIN X (1998)
2. Install the wiring harness on the park brake mechanism bracket.
3. Install the electrical connector on the ground switch of the park brake lever mechanism.
CAUTION: A new cable tension equalizer must be installed when replacing the park brake mechanism. The new cable tension equalizer is
required to correctly adjust park brake cable tension after installing park brake mechanism.
Park Brake Cable Tension Equalizer
4. Install a NEW park brake cable tension equalizer on the park brake lever output cable and rear park brake cables.
CAUTION: A new park brake lever output cable retainer must be used when installing output cable on cable tension equalizer. Cable retainer
usage is required to ensure output cable can not separate from tension equalizer.
Cable Retainer Installed On Tension Equalizer
5. Install a new park brake lever output cable to tension equalizer retaining clip on tension equalizer. The cable retainer must be closed and securely
latched.
6. Cable tension, for the parking brake system is to be correctly adjusted using the following steps.
-
Position park brake lever so it is in the fully released position.
