Stratus L4-2.4L VIN X (1998)
Vacuum Brake Booster: Service and Repair
Removal
Ground Cable Attachment At Strut Tower
1. Remove the remote ground cable from the ground stud located on the left strut tower.
Correctly Isolated Remote Ground Cable
2. Correctly isolate remote ground cable when servicing vehicle by installing the ground cable insulator on the strut tower ground stud as shown.This
will prevent accidental grounding of the remote ground cable.
Speed Control Servo Attachment
3. If equipped, remove the vehicle's wiring harness connector from the speed control servo. Remove the 2 speed control servo mounting bracket to
strut tower attaching nuts. Without removing speed control cable from servo, move speed control servo out of the way.
