Stratus L4-2.4L VIN X (1998)
8. Install the purge control solenoid on the left front frame rail. Tighten the purge control solenoid mounting bolt.
EGR Valve Transducer Assembly
9. Install the EGR transducer assembly on the EGR valve. Install the vehicle wiring harness connector on the EGR transducer, ensuring the retaining
clip is fully engaged with transducer.
Vacuum Hose Attachment To Check Valve
10. Connect all previously removed vacuum hoses onto the power brake vacuum booster check valve.
Speed Control Servo Attachment
11. If equipped, install speed control servo on the mounting studs in the left strut tower. Install the 2 speed control servo bracket mounting nuts.
Tighten the 2 mounting nuts to a torque of 6 Nm (55 inch lbs.).
12. Check brake light switch for correct adjustment. If required, adjust stop lamp switch as necessary. Refer to Lighting and Horns Brake Light
Switch.
