Stratus L4-2.4L VIN X (1998)
Radiator Cooling Fan Motor: Service and Repair
FAN SERVICE
There are no repairs to be made to the fan. If the fan is warped, cracked, or otherwise damaged, it must be replaced with only the recommended part
for adequate strength, performance and safety.
Radiator Fan - Servicing
1. To remove fan from motor shaft, bench support the motor and motor shaft, while removing the fan retaining clip, so that the shaft and motor will
not be damaged by excessive force. Surface burr removal may be required to remove fan from motor shaft. Do not permit the fan blades to touch
the bench.
2. To install fan on motor shaft, slide the fan over the shaft. Support motor and shaft while installing fan retaining clip.
Fan Module
Fan Module
FAN SHROUD
All have fan shrouds to improve fan air flow efficiency.
The shroud supports the electric fan motor and fan.
FAN MOTOR SERVICE
1. Remove the motor fasteners from support Remove motor from support.
2. Reverse the above procedure for Installation. Tighten the short fan motor fasteners to 3 Nm (25 inch lbs.) and tighten the tall fan motor fasteners
to 5 Nm (45 inch lbs.).
Installation
1. Install assembly to radiator. Torque shroud to radiator fasteners to 7.5 Nm (65 inch lbs.).
2. Connect fan motor lead. For wiring diagrams of fan motor systems.