Stratus L4-2.4L VIN X (1998)
Valve Cover: Service and Repair
Ignition Coil Pack And Ground Strap
REMOVAL
1. Remove ignition coil pack and plug wires. Remove ground strap.
2. Remove the cylinder head cover fasteners.
3. Remove cylinder head cover from cylinder head.
INSTALLATION
NOTE: Replace spark plug well seals when installing a new cylinder head cover gasket.
Cylinder Head Cover Gasket And Spark Plug Seals
1. Install new cylinder head cover gaskets and spark plug seals.
CAUTION: Do not allow oil or solvents to contact the timing belt as they can deteriorate the rubber and cause tooth skipping.
2. Apply Mopar Silicone Rubber Adhesive Sealant at the camshaft cap corners and at the top edge of the 1/2 round seal.
Cylinder Head Cover Tightening Sequence