Stratus L4-2.4L VIN X (1998)
Drive Belt: Service and Repair
Removal and Installation
The content of this article reflects changes called for in TSB 26-04-98.
AIR CONDITIONING COMPRESSOR AND GENERATOR BELT
Accessory Drive Belt System - All Engines
Accessory Drive Belt System - All Engines
1. Loosen T-Bolt locking nut A and pivot bolt B to remove and install Poly V belt and/or adjust belt tension.
2. Tighten adjusting bolt to adjust belt tension to specification.
Air Conditioning Compressor And Generator Belt Adjustment
3. Tighten T-Bolt locking nut A and pivot bolt B to 54 Nm (40 ft. lbs.).
POWER STEERING PUMP BELT
1. From the top of the vehicle loosen pivot bolt C.