Stratus L4-2.4L VIN X (1998)
Control Module Screws
3. Remove cluster hood bezel retaining screws in the trim bezel opening.
4. Pry up the cluster hood bezel a few inches to expose the cubby bin/cigar lighter bezel screws.
5. Remove the cubby bin/cigar lighter bezel and wiring.
6. Remove the control module retaining screws.
Control Module At Bezel Opening
7. Drop the A/C control module into the cigar lighter/cubby bin bezel opening. Then disconnect the wiring on the rear of the control module.
8. Release the recirculation cable retaining clip from the top of the control module. Retain the clip for future use. Then disconnect the recirculation
control cable.
9. Remove right under panel silencer/duct.
