Stratus L4-2.4L VIN X (1998)
Discount Recirculation Cable
10. Disconnect cable flag at right of recirculation housing.
11. Remove cable core end from recirculation actuator lever,
INSTALLATION
-
For installation reverse the above procedures. Verify that the cables are properly adjusted, free of interference and the module is seated properly.
Cable Adjustment
The cables must be adjusted for proper function of the control module. To adjust the cable, attach the cable to the lever arm of the control module.
Turn the knob fully counterclockwise. Pull the cable jacket away from the cable end until taut. Clip the cable jacket to the control module. The
knob should travel a full 180 degree if the cable is properly adjusted.
