dodge Workshop Repair Guides

Dodge Workshop Service and Repair Manuals

Turn Signals > < Turn Signal Switch|Diagrams|Page 6878
Page 1
background image

Tail Light Bulb: Service and Repair

REMOVAL

1. Release trunk latch and open trunk lid.
2. Remove wing-nuts holding tail lamp to rear closure panel.
3. Separate lamp from opening in quarter panel.
4. Disengage wire connector from back of tail lamp.
5. Rotate socket counterclockwise one quarter turn.

Tail, Stop And Turn Signal Lamp Bulb

6. Pull socket from back of lamp.
7. Pull bulb from socket.

INSTALLATION

-

Reverse the preceding operation

Turn Signals > < Turn Signal Switch|Diagrams|Page 6878