Stratus L4-2.4L VIN X (1998)
Fig. 105 Crankshaft And Camshaft Timing
7. Once the timing belt has been installed and tensioner adjusted, rotate the crankshaft CLOCKWISE two complete revolutions manually for seating
of the belt, until the crankshaft is repositioned at the TDC position. Verify that the camshaft and crankshaft timing marks are in proper position.
Fig. 106 Timing Belt Tension Verification
8. Check if the spring tang is within the tolerance window. If the spring tang is within the tolerance window, the installation process is complete and
nothing further is required. If the spring tang is not within the tolerance window, repeat Steps 5 through 7.
9. Continue with normal installation process. See: Timing Belt Removal and Installation
