Stratus L4-2.4L VIN X (1998)
1. Using a clean lint free cloth, clean fuel tube nipple and retainer.
2. Prior to connecting fitting to the fuel tube, coat fuel tube nipple with clean 30 weight engine oil.
CAUTION: Never install a quick-connect fitting without retainer being either on the fuel tube or already in the quick-connect fitting. In either
case, ensure retainer locks securely into quick-connect fitting by firmly pulling on fuel tube and fitting to ensure it is secured.
3. Push quick-connect fitting over fuel tube until retainer seats and a click is heard.
NOTE: The quick-connect fitting has windows in the sides of the casing. When the fitting completely attaches to the fuel tube, the retainer
locking ears and fuel tube shoulder are visible in the windows.
-
If they are not visible, the retainer was not properly installed Fig. 6.
-
Do not rely upon the audible click to confirm a secure connection.
4. Ensure locking ears on retainer and the shoulder (stop bead) on the fuel tube are completely visible in the quick-connect fitting windows.
-
Do not rely upon the audible click to confirm a secure connection.
-
Always pull on the line and fitting to ensure that retainer is seated.
5. Verify connection by pulling on the lines.
-
If fitting locks in place, the connection is secure.
CAUTION: When using the ASD Fuel System Test, the Auto Shutdown (ASD) relay remains energized for either 7 minutes, until the test is
stopped, or until the ignition switch is turned to the Off position.
6. Use DRB Scan Tool-ASD Fuel System Test to pressurize the fuel system. Check for leaks.
