Stratus L4-2.4L VIN X (1998)
Throttle Body: Service and Repair
Throttle Body Replacement
Fig. 4 Throttle Cable Attachment To Throttle Body
Fig. 5 Disconnecting Throttle Cable
THROTTLE BODY - REMOVAL
1. Remove air inlet resonator.
2. Remove throttle cable from the throttle body lever Figs. 4 and 5.
3. Compress the retaining tabs on the cable and slide cable out of bracket Fig. 4.
4. If equipped with speed control, remove speed control cable from throttle lever by sliding clasp out hole used for throttle cable.
5. Remove EVAP purge hose from nipple on throttle body.
6. Remove 2 screws holding cable mounting bracket and support bracket.
7. Remove throttle body mounting bolts.
8. Lift throttle body far enough to remove connectors from the throttle position sensor and idle air control motor. Remove throttle body.