Stratus L4-2.4L VIN X (1998)
2.
Allow the cable to adjust itself to the correct position.
3.
Tighten the adjustment nut to 53 in. lbs (6 N.m).
e.
Verify the interlock cable adjustment:
>
With the ignition key in the "LOCK" position, the shift lever should be locked in the "PARK" position.
>
Place the ignition switch in the "RUN" position. Move the shift lever to the reverse position. You should not be able to remove the ignition key
from the lock cylinder.
>
Place the shift lever in the "PARK" position. Turn the ignition key to the "LOCK" position. You should be able to remove the ignition key
from the lock cylinder.
19.
Install the shift bezel and boot.
20.
If required, install the radio bezel.
21.
Install the shift handle and tighten the set screw.
22.
Connect the negative battery cable.
23.
Check for proper shifter and ignition/park interlock operation.
