Stratus L4-2.4L VIN X (1998)
Ignition Cable: Initial Inspection and Diagnostic Overview
Check the spark plug cable connections for good contact at the coil and distributor cap towers and at the spark plugs.
-
Terminals should be fully seated.
-
The nipples and spark plug covers should be in good condition.
-
Nipples should fit tightly on the coil and distributor cap towers and spark plug cover should fit tight around spark plug insulators.
-
Loose cable connections can cause ignition malfunctions by permitting water to enter the towers, corroding, and increasing resistance.
To maintain proper sealing at the terminal connections, the connections should not be broken unless testing indicates high resistance, an open
circuit or other damage.
Clean high tension cables with a cloth moistened with a non-flammable solvent and wipe dry. Check for brittle or cracked insulation.
