dodge Workshop Repair Guides

Dodge Workshop Service and Repair Manuals

Control Module HVAC|Service and Repair|Page 48 > < Component Locations|Page 44
Page 1
background image

Control Module HVAC: Service and Repair

HVAC Control Module

The control module is located below the radio.

REMOVAL
1. Place the ignition key in the OFF position before removing control module.

Control Module

2. Remove trim bezel.

Control Module Screws

3. Remove cluster hood bezel retaining screws in the trim bezel opening.
4. Pry up the cluster hood bezel a few inches to expose the cubby bin/cigar lighter bezel screws.
5. Remove the cubby bin/cigar lighter bezel and wiring.

Control Module HVAC|Service and Repair|Page 48 > < Component Locations|Page 44