Stratus L4-2.4L VIN X (1998)
Vehicle owners will be notified in six (6) phases. Refer to the chart.
Dealers are encouraged to consider alternative scheduling and servicing approaches for this recall. This repair does not require hoists or other full service
facility special equipment and is a DaimlerChrysler Mobile Service approved repair.
Additional Information
If you have any questions or need assistance in completing this action, please contact your Service and Parts District Manager.
Customer Services Field Operations
DaimlerChrysler Corporation
A. Inspect Ign./Park Shift Interlock Operation
With the ignition key removed and your foot on the brake, depress the shifter button and attempt to move the shift lever out of the "Park" position.
IMPORTANT:
Use normal effort when attempting to move the shift lever. Use of excessive force may cause the floor shifter assembly to break.
>
If the shift lever CANNOT be moved out of the "Park" position, continue with Section "B" - Install Load Limiting Push Rod.
>
If the shift lever CAN be moved out of the "Park" position, the shifter assembly must be replaced. Continue with Section "C" - Floor Shifter
Replacement.
B. Install Load Limiting Push Rod
NOTE:
Only those vehicles with a properly functioning ignition/park interlock, as determined by the inspection in Section "A" require the load limiting push
rod.
1.
Secure the vehicle to prevent it from rolling during this service procedure.
2.
Insert the key into the ignition and turn it to the "RUN" position.
3.
Place shift lever into the full rearward position.
