Stratus L4-2.4L VIN X (1998)
10. Remove the stabilizer bar bushing clamp to body attaching bolts only. The sway bar bushing clamp to front suspension crossmember bolts do not
need to be removed
11. If vehicle is equipped with antilock brakes, the hydraulic control unit can not hang from the brake tubes when lowering front suspension
crossmember. Using wire, tie the antilock brakes hydraulic control unit to the body and engine so the wire will support it when the crossmember is
lowered.
12. If vehicle is equipped with antilock brakes, remove the 3 bolts attaching the antilock brakes hydraulic control unit to the front suspension
crossmember.
13. Remove the bolts attaching the shock absorber clevis to the left and right lower control arms.
14. Remove the 2 bolts attaching the under engine support bracket to the front edge of the front suspension crossmember.