Stratus L4-2.4L VIN X (1998)
16. Remove the upper-isolator and the sleeve from the shock absorber mount.
17. Remove the lower isolator from the rear shock absorber mount.
18. Inspect the rear shock absorber mount upper and lower isolators and the upper spring isolator for the following:
-
Mount for cracks and distortion and locating studs for any sign of damage.
-
Severe deterioration of the upper or lower coil spring isolators.
-
Deterioration of the shock absorber rod to shock absorber mounting bracket bushings.
-
Inspect dust shield for rips and/or deterioration.
-
Inspect jounce bumper for, cracks and signs of deterioration.
Assembly
CAUTION: Do not clamp shock absorber in a vise by the body of the shock absorber. The shock absorber must only be clamped in the vise using the
clevis bracket on bottom of shock absorber.
