Stratus L4-2.4L VIN X (1998)
Separating Steering Knuckle From Outer C/V Joint
14. Pull steering knuckle assembly out and away from outer C/V joint of the driveshaft assembly.
CAUTION: When inserting pry bar between inner tripod joint and transaxle case, care must be used to ensure no damage occurs to oil seal in
transaxle case.
Disengaging Inner Tripod Joint From Transaxle
15. Support the outer end of the driveshaft assembly. Insert a pry bar between inner tripod joint and transaxle case. Pry against inner tripod joint, until
tripod joint retaining snap ring is disengaged from transaxle side gear.
Tripod Joint Removal From Transaxle
