Stratus V6-2.5L VIN H (1997)
Paint: Technical Service Bulletins
Paint - Fallout Damage Repair
NO: 23-69-96
GROUP: Body
DATE: Nov. 22, 1996
SUBJECT:
Repair Of Fallout Damaged Paint
MODELS:
1997 (AB) Ram Van/Wagon
1997 (AN) Dakota
1997 (BR) Ram Pickup
1997 (FJ) Sebring/Avenger/Talon
1997 (GS) Chrysler Voyager (International Market)
1997 (JA) Cirrus/Stratus/Breeze
1997 (JX) Sebring Convertible
1997 (LH) Concorde/Intrepid/LHS/New Yorker/Vision
1997 (NS) Town & Country/Caravan/Voyager
1997 (PL) Neon
1997 (SR) Viper/Viper GTS
1997 (TJ) Wrangler
1997 (XJ) Cherokee
1997 (ZG) Grand Cherokee (International Market)
1997 (ZJ) Grand Cherokee
NOTE:
THE MOPAR FALLOUT REMOVAL KIT CAN BE USED ON ANY CURRENT OR PAST MODEL YEAR CHRYSLER VEHICLE.
DISCUSSION:
Mopar Parts has released a new product, Mopar Fallout Removal Kit (p/n 04882417) for correcting paint damage due to industrial fallout, rail dust,
over-spray and volcanic ash.
The Mopar Fallout Removal Kit does not use a compounding process or acid wash and is the current Chrysler preferred method for correcting fallout
damage. This product uses a clay polymer material and a liquid that are safer and better than other fallout removal methods. The Mopar Fallout Removal
Kit is easier to use and less expensive than other methods.
Some vehicles that would have been repainted in the past have been saved from that time consuming and expensive process with the Mopar Fallout
Removal Kit.
NOTE:
WHEN ALL OF THE FALLOUT REPAIR LIQUID HAS BEEN USED, DISCARD THE CLAY POLYMER MATERIAL. CONTINUED USE OF
THE CLAY POLYMER AFTER ALL OF THE FALLOUT REPAIR LIQUID HAS BEEN USED CAN CAUSE MINOR SCRATCHING OF THE
PAINT FINISH. THE AMOUNT OF FALLOUT REPAIR LIQUID PROVIDED IN THE KIT WAS ESTABLISHED BY DETERMINING THE
AMOUNT OF FALLOUT THE CLAY POLYMER COULD ABSORB BEFORE IT BECAME OVER SATURATED WITH FALLOUT AND
WOULD CAUSE DAMAGE TO THE PAINT FINISH.
POLICY: Information Only
