dodge Workshop Repair Guides

Dodge Workshop Service and Repair Manuals

Sensors and Switches - Body and Frame > < Seat Track - Adjuster Linkage Clips Broken
Page 1
background image

Seat Track: All Technical Service Bulletins
Seat Track - Adjuster Linkage Clips Broken

NO: 23-66-96

GROUP: Body

DATE: Nov. 15, 1996

SUBJECT: 
Seat Track Adjuster Linkage Clips Broken

MODELS: 
1995 - 1997 (JA) Breeze/Cirrus/Stratus

NOTE

:

THIS BULLETIN APPLIES TO VEHICLES EQUIPPED WITH TWO WAY AND FOUR WAY MANUAL SEAT TRACKS.

SYMPTOM/CONDITION:

Excessive force applied to the seat adjusting bar located in the front of the seat can cause the linkage attachment clip(s) to break. If this happen the seat
will not adjust when the bar is pulled.

DIAGNOSIS:

Visually verify linkage clips are broken; perform the Repair Procedure.

PARTS REQUIRED:

AR(4)

04658675

Clip, Latch Link

REPAIR PROCEDURE:

This bulletin involves replacing the seat adjusting bar linkage clips.

Replace the seat adjusting bar linkage clips as necessary. Verify seat track operation.

POLICY: Reimbursable within the provisions of the warranty.

TIME ALLOWANCE:

Labor Operation No:

23-42-24-90

0.2 Hrs.

FAILURE CODE:

P8 - New Part

Sensors and Switches - Body and Frame > < Seat Track - Adjuster Linkage Clips Broken